Pro Matt Cellulose Sealer Spray 400ml
Our Professional Matt Sanding Sealer Spray is perfect for any surface, not just wood, that needs superior adhesion protection. Our high performance spray leaves a tough surface that keeps applied colors in place without blending or running.
Our Professional Matt Sanding Sealer Spray is perfect for any surface, not just wood, that needs superior adhesion protection. Our high performance spray leaves a tough surface that keeps applied colors in place without blending or running.
Our Professional Matt Sanding Sealer Spray is perfect for any surface, not just wood, that needs superior adhesion protection. Our high performance spray leaves a tough surface that keeps applied colors in place without blending or running.
Our Professional Matt Sanding Sealer Spray is perfect for any surface, not just wood, that needs superior adhesion protection. Our high performance spray leaves a tough surface that keeps applied colors in place without blending or running. It works great with our Intrinsic Color Collection and Carnival Colours and with its non-darkening effect, you can be sure it won’t affect the true color of your project. Our sanding sealer spray is a great way to make quick work of your next project.
Please note this product cannot be shipped outside of the UK. Visit Stockists Page for overseas distributors.
-
Sand your work down to at least 400 grit and ensure surface is free from dust, grease and moisture;
Prepare the surface with a suitable sealer and ensure it has fully dried.
Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces;
Avoid breathing spray - Use appropriate PPE and use in a well ventilated area;
Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two to four coats is usually sufficient;
Lightly cut back the lacquer between dry coats for an even finish;
Under normal conditions, this Professional Lacquer can be mechanically buffed in under 3 hours.
For a glass-like finish, use abrasive pastes
-
Use for sealing decorative wood-turned items on a lathe, flat woodwork or other items requiring a tough sealer before finishing.
-
Clear spray. Characteristic aroma of solvents and aerosols
-
Supplied in a 400ml aerosol tin.
Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.
-
Kept according to instructions, you can expect the product to last indefinitely. We recommend using the product within 12 months of purchase, though.
-
Unknown - product has not been tested.
-
SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!
DANGER: Contains n-butyl acetate, Hydrocarbons, C9, aromatics, xylene, 2-ethoxy-1-methylethyl acetate Extremely flammable aerosol. Pressurised container. Flammable liquid and vapour. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Do not expose to temperatures exceeding 50°C/122°F. Repeated exposure may cause skin dryness or cracking. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep Away From Children. Avoid release to the environment. IF SWALLOWED or IN EYES: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting. Dispose of contents/container in accordance with regional regulations.
-
Item description
Liability:
As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.